User Management (Active Directory)

Creation

Let's walk through the basics of user creation for Active Directory. There are some requirements you must know prior to creation:

Requirement
You must connect to your server via TLS or SSL if you set the the users password (`unicodepwd`) attribute
You must connect to your server with an account that has permission to create users
You must set a common name (`cn`) for the user
You must set the `unicodePwd` attribute as a non-encoded string (more on this below)
To set the users `userAccountControl`, it must be set after the user has been created

Attributes that are set below can be cased in any manor. They can be UPPERCASED, lowercased, camelCased, etc. Use whichever casing you prefer to be most readable in your application.

<?php

use LdapRecord\Models\ActiveDirectory\User;

$user = (new User)->inside('ou=Users,dc=local,dc=com');

$user->cn = 'John Doe';
$user->unicodePwd = 'SecretPassword';
$user->samaccountname = 'jdoe';
$user->userPrincipalName = 'jdoe@acme.org';

$user->save();

// Enable the user.
$user->userAccountControl = 512;

try {
    $user->save();
} catch (\LdapRecord\LdapRecordException $e) {
    // Failed saving user.
}

It is wise to encapsulate saving your user in a try / catch block, so if it fails you can determine if the cause of failure is due to your domains password policy.

Password Management

Setting Passwords

Using the included LdapRecord\Models\ActiveDirectory\User model, an attribute mutator has been added that assists in the setting and changing of passwords on user objects. Feel free to take a peek into the source code to see how it all works.

The password string you set on the users unicodePwd attribute is automatically encoded. You do not need to encode it yourself. Doing so will cause an error or exception upon saving the user.

Once you have set a password on a user object, this generates a modification on the user model equal to a LDAP_MODIFY_BATCH_REPLACE:

<?php

use LdapRecord\Models\ActiveDirectory\User;

$user = new User();

$user->unicodepwd = 'secret';

$modification = $user->getModifications()[0];

var_dump($modification);

// "attrib" => "unicodepwd"
// "modtype" => 3
// "values" => array:1 [
//    0 => ""\x00s\x00e\x00c\x00r\x00e\x00t\x00"\x00"
// ]

As you can see, a batch modification has been automatically generated for the user. Upon calling save(), it will be sent to your LDAP server.

Changing Passwords

To change a user's password, you must either:

Bind to your LDAP server with a user that has permissions to reset passwords
Or; bind as the user whose password you are trying to change.

There are some prerequisites you must know for changing passwords:

Prerequisites
You must provide the correct user's old password
You must provide a new password that abides by your password policy, such as history, complexity, and length
You must set the `unicodepwd` attribute with an array containing two (2) values (old & new password)

Let's walk through an example:

You must use a try / catch block upon saving. An LdapRecord\LdapRecordException will always be thrown when an incorrect old password has been given, or the new password does not abide by your password policy.

<?php

use LdapRecord\Models\ActiveDirectory\User;

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

$user->unicodepwd = ['old-password', 'new-password'];

try {
    $user->save();

    // User password changed!
} catch (\LdapRecord\Exceptions\InsufficientAccessException $ex) {
    // The currently bound LDAP user does not
    // have permission to change passwords.
} catch (\LdapRecord\Exceptions\ConstraintException $ex) {
    // The users new password does not abide
    // by the domains password policy.
} catch (\LdapRecord\LdapRecordException $ex) {
    // Failed changing password. Get the last LDAP
    // error to determine the cause of failure.
    $error = $ex->getDetailedError();

    echo $error->getErrorCode();
    echo $error->getErrorMessage();
    echo $error->getDiagnosticMessage();
}

Resetting Passwords

To reset a users password, you must be bound to your LDAP directory with a user whom has permission to do so on your directory.

You can perform a password reset by simply setting the users unicodepwd attribute as a string, and then calling the save() method, similarly to how it is done during user creation:

<?php

use LdapRecord\Models\ActiveDirectory\User;

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

$user->unicodepwd = 'new-password';

try {
    $user->save();

    // User password reset!
} catch (\LdapRecord\Exceptions\InsufficientAccessException $ex) {
    // The currently bound LDAP user does not
    // have permission to reset passwords.
} catch (\LdapRecord\Exceptions\ConstraintException $ex) {
    // The users new password does not abide
    // by the domains password policy.
} catch (\LdapRecord\LdapRecordException $ex) {
    // Failed resetting password. Get the last LDAP
    // error to determine the cause of failure.
    $error = $ex->getDetailedError();

    echo $error->getErrorCode();
    echo $error->getErrorMessage();
    echo $error->getDiagnosticMessage();
}

Password Policy Errors

Active Directory will return diagnostic error codes when a password modification fails.

To determine the cause, you can check this diagnostic message to see if it contains any of the following codes:

Code	Meaning
`525`	User not found
`52e`	Invalid credentials
`530`	Not permitted to logon at this time
`531`	Not permitted to logon at this workstation
`532`	Password expired
`533`	Account disabled
`701`	Account expired
`773`	User must reset password
`775`	User account locked

<?php

use LdapRecord\Models\ActiveDirectory\User;

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

$user->unicodepwd = ['old-password', 'new-password'];

try {
    $user->save();

    // User password changed!
} catch (\LdapRecord\LdapRecordException $ex) {
    // Failed changing password. Get the last LDAP
    // error to determine the cause of failure.
    $error = $ex->getDetailedError();

    echo $error->getErrorCode(); // 49
    echo $error->getErrorMessage(); // 'Invalid credentials'
    echo $error->getDiagnosticMessage(); // '80090308: LdapErr: DSID-0C09042A, comment: AcceptSecurityContext error, data 52e, v3839'

    if (strpos($error->getDiagnosticMessage(), '52e')) {
        // This is an invalid credentials error.
    }
}

Unlock Locked Out User Account

If a user has been locked out, set the lockouttime attribute to 0 (zero):

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

$user->update(['lockouttime' => 0]);

Extend User Password Expiration

Sometimes you may wish to extend a user's password expiration for the full duration of your domains password expiry time.

To do this, you must update the user's pwdLastSet time to 0, then to -1:

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

// Set password last set to 'Never':
$user->update(['pwdlastset' => 0]);

// Set password last set to the current date / time:
$user->update(['pwdlastset' => -1]);

// User password expiration successfully extended.

User Must Change Password at Next Logon

To toggle the "User Must Change Password at Next Logon" checkbox that is available in the Active Directory GUI - you must set the pwdlastset attribute to one of the below values:

Value	Meaning
`0`	Toggled on. The user will be required to change their password.
`-1`	Toggled off. The user will not be required to change their password.

Important:

The pwdlastset attribute can only be modified by domain administrators

If toggled on, the Active Directory user will not pass LDAP authentication until they visit a domain joined computer and update their password

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

// The user must change their password on next login.
$user->pwdlastset = 0;

$user->save();

User Account Control

A users userAccountControl attribute stores an integer value.

This integer value contains the sums of various integer flags. These flags control the accessibility and behaviour of an Active Directory user account, such as account disablement, password expiry, the ability to change passwords, and more.

For example, setting a users userAccountControl to 512 would mean that the user account is a default account type that represents a typical user. Setting it to 2, would mean the account has been disabled.

Combining both to 514 (512 + 2 = 514) would mean the users account is a typical user account, that is also disabled.

Usage

You can manipulate a users userAccountControl manually by simply setting the userAccountControl property on an existing user using the raw integer value, or you can use the account control builder LdapRecord\Models\Attributes\AccountControl:

<?php

use LdapRecord\Models\ActiveDirectory\User;
use LdapRecord\Models\Attributes\AccountControl;

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

// Setting the UAC value manually:
$user->userAccountControl = 512; // Normal, enabled account.

// Or, using the UAC builder:
$user->userAccountControl = (new AccountControl)->accountIsNormal();

$user->save();

Using the AccountControl builder, methods called will automatically sum the integer value.

For example, let's set an account control for a user with the following controls:

The user account is normal
The user account password does not expire
The user account password cannot be changed

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

$uac = new AccountControl();

$uac->accountIsNormal();
$uac->passwordDoesNotExpire();
$uac->passwordCannotBeChanged();

$user->userAccountControl = $uac;

$user->save();

The AccountControl builder also allows you to determine which flags are set.

This can be done with the has and doesntHave methods.

Create an AccountControl with the users userAccountControl value in the constructor:

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

$uac = new AccountControl(
    $user->getFirstAttribute('userAccountControl')
);

if ($uac->has(AccountControl::LOCKOUT)) {
    // This account is locked out.
}

if ($uac->doesntHave(AccountControl::LOCKOUT)) {
    // The account is not locked out.
}

Available Constants

The Account Control builder has constants for every possible value:

Constant	Value
`AccountControl::SCRIPT`	`1`
`AccountControl::ACCOUNTDISABLE`	`2`
`AccountControl::HOMEDIR_REQUIRED`	`8`
`AccountControl::LOCKOUT`	`16`
`AccountControl::PASSWD_NOTREQD`	`32`
`AccountControl::PASSWD_CANT_CHANGE`	`64`
`AccountControl::ENCRYPTED_TEXT_PWD_ALLOWED`	`128`
`AccountControl::TEMP_DUPLICATE_ACCOUNT`	`256`
`AccountControl::NORMAL_ACCOUNT`	`512`
`AccountControl::INTERDOMAIN_TRUST_ACCOUNT`	`2048`
`AccountControl::WORKSTATION_TRUST_ACCOUNT`	`4096`
`AccountControl::SERVER_TRUST_ACCOUNT`	`8192`
`AccountControl::DONT_EXPIRE_PASSWORD`	`65536`
`AccountControl::MNS_LOGON_ACCOUNT`	`131072`
`AccountControl::SMARTCARD_REQUIRED`	`262144`
`AccountControl::TRUSTED_FOR_DELEGATION`	`524288`
`AccountControl::NOT_DELEGATED`	`1048576`
`AccountControl::USE_DES_KEY_ONLY`	`2097152`
`AccountControl::DONT_REQ_PREAUTH`	`4194304`
`AccountControl::PASSWORD_EXPIRED`	`8388608`
`AccountControl::TRUSTED_TO_AUTH_FOR_DELEGATION`	`16777216`
`AccountControl::PARTIAL_SECRETS_ACCOUNT`	`67108864`

Available Methods

The Account Control builder has methods to apply every possible value:

Method	Constant Applied
`AccountControl::runLoginScript()`	`AccountControl::SCRIPT`
`AccountControl::accountIsDisabled()`	`AccountControl::ACCOUNTDISABLE`
`AccountControl::homeFolderIsRequired()`	`AccountControl::HOMEDIR_REQUIRED`
`AccountControl::accountIsLocked()`	`AccountControl::LOCKOUT`
`AccountControl::passwordIsNotRequired()`	`AccountControl::PASSWD_NOTREQD`
`AccountControl::passwordCannotBeChanged()`	`AccountControl::PASSWD_CANT_CHANGE`
`AccountControl::allowEncryptedTextPassword()`	`AccountControl::ENCRYPTED_TEXT_PWD_ALLOWED`
`AccountControl::accountIsTemporary()`	`AccountControl::TEMP_DUPLICATE_ACCOUNT`
`AccountControl::accountIsNormal()`	`AccountControl::NORMAL_ACCOUNT`
`AccountControl::accountIsForInterdomain()`	`AccountControl::INTERDOMAIN_TRUST_ACCOUNT`
`AccountControl::accountIsForWorkstation()`	`AccountControl::WORKSTATION_TRUST_ACCOUNT`
`AccountControl::accountIsForServer()`	`AccountControl::SERVER_TRUST_ACCOUNT`
`AccountControl::passwordDoesNotExpire()`	`AccountControl::DONT_EXPIRE_PASSWORD`
`AccountControl::accountIsMnsLogon()`	`AccountControl::MNS_LOGON_ACCOUNT`
`AccountControl::accountRequiresSmartCard()`	`AccountControl::SMARTCARD_REQUIRED`
`AccountControl::trustForDelegation()`	`AccountControl::TRUSTED_FOR_DELEGATION`
`AccountControl::doNotTrustForDelegation()`	`AccountControl::NOT_DELEGATED`
`AccountControl::useDesKeyOnly()`	`AccountControl::USE_DES_KEY_ONLY`
`AccountControl::accountDoesNotRequirePreAuth()`	`AccountControl::DONT_REQ_PREAUTH`
`AccountControl::passwordIsExpired()`	`AccountControl::PASSWORD_EXPIRED`
`AccountControl::trustToAuthForDelegation()`	`AccountControl::TRUSTED_TO_AUTH_FOR_DELEGATION`
`AccountControl::accountIsReadOnly()`	`AccountControl::PARTIAL_SECRETS_ACCOUNT`

Group Management

If you are utilizing the included LdapRecord\Models\ActiveDirectory\User model, the groups() relationship exists for easily removing / adding groups to users.

Getting Groups

To get the groups that a user is a member of, call the groups() relationship method. This will return the immediate groups that the user is a member of:

<?php

use LdapRecord\Models\ActiveDirectory\User;

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

// Get immediate groups the user is apart of:
$groups = $user->groups()->get();

foreach ($groups as $group) {
    echo $group->getName();
}

You may also want to retrieve groups that are members of groups that the user is apart of. This is called a recursive relationship query.

To retrieve groups of groups, call the recursive() method following the groups() relation call:

<?php

use LdapRecord\Models\ActiveDirectory\User;

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

// Get nested groups the user is apart of:
$groups = $user->groups()->recursive()->get();

foreach ($groups as $group) {
    echo $group->getName();
}

Filtering Groups

Relations in LdapRecord act as query builders, so you can chain query methods on the groups() relation itself:

<?php

use LdapRecord\Models\ActiveDirectory\User;

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

// Get all groups the user is apart of that contain 'Accounting':
$groups = $user->groups()->whereContains('cn', 'Accounting')->get();

// Get all groups the user is apart of that are members of the 'Office' group:
$groups = $user->groups()->whereMemberOf('cn=Office,ou=Groups,dc=local,dc=com')->get();

Checking Existence

To check if a user is a member of any group, call the exists() method on the groups() relationship:

<?php

use LdapRecord\Models\ActiveDirectory\User;

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

if ($user->groups()->exists()) {
    // The user is a member of at least one group.
}

To check if a user is an immediate member of a specific group, pass a model into the exists() method:

<?php

use LdapRecord\Models\ActiveDirectory\User;
use LdapRecord\Models\ActiveDirectory\Group;

$group = Group::find('cn=Accounting,dc=local,dc=com');

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

if ($user->groups()->exists($group)) {
    // The user is an immediate member of the 'Accounting' group.
}

To check if a user is a member of a group that could be nested in a sub-group, call the recursive() method before calling exists():

<?php

use LdapRecord\Models\ActiveDirectory\User;
use LdapRecord\Models\ActiveDirectory\Group;

$group = Group::find('cn=Accounting,dc=local,dc=com');

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

if ($user->groups()->recursive()->exists($group)) {
    // The user is a member of the 'Accounting' group.
}

Adding Groups

To add groups to a user, call the groups() relationship method, then attach():

<?php

use LdapRecord\Models\ActiveDirectory\User;
use LdapRecord\Models\ActiveDirectory\Group;

$group = Group::findOrFail('cn=Accounting,ou=Groups,dc=local,dc=com');

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

if ($user->groups()->attach($group)) {
    // Successfully added the group to the user.
}

Removing Groups

To remove groups on user, call the groups() relationship method, then detach():

<?php

use LdapRecord\Models\ActiveDirectory\User;
use LdapRecord\Models\ActiveDirectory\Group;

$group = Group::findOrFail('cn=Accounting,ou=Groups,dc=local,dc=com');

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

if ($user->groups()->detach($group)) {
    // Successfully removed the group from the user.
}

The detach() method will return true if the user is already not apart of the given group. This does not indicate that the user was previously a member.

You may want to locate groups on the user prior removal to ensure they are a member:

<?php

use LdapRecord\Models\ActiveDirectory\User;

$user = User::find('cn=John Doe,ou=Users,dc=local,dc=com');

$group = $user->groups()->first();

if ($group && $user->groups()->detach($group)) {
    // Successfully removed the first group from the user.
}

Generated on November 8, 2024

Edit on GitHub

On this page